In this article, we will share our 3D printer Slicer profiles, made for PLA and PETG. We tune these profiles to deliver a good balance between speed and print quality, and worked really well for us. This is just going to be a temp article placement until our .co.uk site goes online.
Simplify3D Slicer Profiles
Many of us are still using Simplify3D as our slicer it’s hard to convert to a different program, yes S3D is a paid software with hardly any updates and its falling behind to there competitors will they eventually surpass the competition. Let’s get to the point down below: we have many profiles for all different machines and setups.
PLA Slicer Profiles
|JGAurora A5S Slicer Profile – Link||Eryone Thinker S Slicer Profile – Link|
|JG Maker Magic Slicer Profile – Link||Eryone Thinker SE Slicer Profile – Link|
|JGAurora A3S Slicer Profile – Link||Longer LK4 Slicer Profile – Link|
|Tevo Tarantula PRO Slicer Profile – Link||Longer LK4 Pro Slicer Profile – Link|
|Tevo Tornado Slicer Profile – Link||Geeetech A10 Slicer Profile – Link|
|Tevo Little Monster Slicer Profile – Link||Geeetech A10M Slicer Profile – Link|
|Tevo Michaelangelo Slicer Profile – Link||Easythreed Nano Slicer Profile – Link|
|Tevo Nereus Slicer Profile – Link||Easythreed Dora Slicer Profile – Link|
|Creality Ender 3 Pro Slicer Profile – Link||Biqu B1 Slicer Profile – Link|
|Creality Ender 3 Slicer Profile – Link||Biqu Magician Slicer Profile – Link|
|Creality CR-10S Pro Slicer Profile – Link||Biqu Kossel Pro Slicer Profile – Link|
|Creality CR10 Mini Slicer Profile – Link
||Artillery Sidewinder X1 Slicer Profile – Link|
|Creality CR10S MS Direct Drive Slicer Profile – Link||Sunlu S8 Slicer Profile – Link|
|Makerpi K3 Plus Slicer Profile – Link||Weedo Tina 2 Slicer Profile – Link|
|Jazala Slicer Profile – Link||Anet ET4 Pro – Link|
|Anycubic Kossel Linear Plus – Link||Xvico X3s Slicer Profile – Link|
|Two Trees Bluer Plus – Link new|
PETG Slicer Profiles
- JGAurora A3S Slicer Profile – Link
- Biqu Kossel Pro Slicer Profile – Link
- Ender 3 Pro Slicer Profile NEW – Link
TPU Slicer Profiles
- Creality CP-01 Slicer Profile NEW – Link
Cura is a free slicer that many machine owners and manufactures use. The program is frequently updated. Unfortunately, profiles created with older revisions do not always import properly. They may fail to import, get corrupted, or will not be visible after importing. We will try to indicate which revision it created a profile with and update profiles as time permits.
- Kywoo Tycoon Slicer Profile ** (STOCK) – 4.6.2 – PLA 0.16 – Profile and bonus files – NEW – LINK
- Longer Cube 2 Mini Slicer Profile ** – 4.8.0 – PLA – 3 Layer Height Profiles – NEW – LINK
** Machine profile created from scratch using the built in Custom FFF 3D Printer.
NOTE: Printers added to Cura using the same “base” printer can share their customized 3D printer slicer profiles.
Chitubox Slicer Profiles
Yousu IForm 181 Grey Resin
- Anycubic Photon S NEW – Link