3D Printer Reviews

  • January 20, 2019

    Alfawise U20...

      Alfawise U20 Review The Alfawise U20 from Gearbest is is a large format 3D Printer that costs under $300!  This printer was sent from Gearbest for me to do an honest review.  This is the latest “clone” of the Creality CR10.  It falls in my classification of a large...

  • January 19, 2019

    Alfawise U30...

      The U30 is a relatively new, low cost 3D Printer from Gearbest.  It has a 220 x 220 x 250 build volume.  It includes their touch screen interface on a 2.8″ display. This is the smallest of their line right now, but it is still a pretty hefty build...

  • August 29, 2018

    Aibecy Creality...

    Article review to come soon on www.3dpc.tech —-links—- https://www.thingiverse.com/thing:503766 https://www.thingiverse.com/thing:29114 https://www.thingiverse.com/thing:166… https://www.thingiverse.com/thing:121… http://www.malix3design.com/2017/07/j… https://www.facebook.com/groups/u3dpr… https://www.thingiverse.com/thing:144… https://www.thingiverse.com/thing:220052...

  • August 8, 2018

    Aibecy CR10...

    So, this is kinda an overview/review on the Aibecy CR10 Mini which is available from Amazon at £295 (Price correct at time of article) After owning the CR10S for just shy over 6 months, I wanted another larger build platform 3D printer but with a smaller budget and options were...

  • June 8, 2018

    BIQU Magician...

    BIQU Magician Lipstick-Sized Delta Rostock 3D Printer   Well, let me start off saying first impressions of this BIQU Magician printer seem great! Good quality packing it comes in. A great big cylindrical tube! You could use this as a stool, or even a place to put your printer on…this...

  • June 4, 2018

    Aladdinbox Skycube...

    Introduction Where do I begin?  I am still looking for the perfect 3D printer for a ‘New-To-The Hobby’ kind of person, although the Geeetech E180 was very close. Something that comes fully built, easy to use, easy to maintain, and finally with open avenues of support. The Aladdinbox Skycube doesn’t...

  • May 18, 2018

    Geeetech E180...

    Introduction Hello all, today I am going to be giving you the run down on the Geeetech E180.  I’ve had this printer for two weeks and I was able to print a significant amount of things on it.  This is the initial review, where I will break down what it...

  • April 28, 2018

    Tronxy X3S...

    Inov3D would like to thank Gearbest for sending us their Tronxy X3S for review. We always try our best to give a fair review with the Good and the Bad Points. With any review, we will contact the company if we find any problems to try and get those issues...

  • February 24, 2018

    East 3d...

    Inov3D would like to thank East 3D for sending us their upgraded Gecko for review. We always try our best to give a fair review with the good and the bad points with any review we do. If there are any problems we like to get in contact with the...