The last build surface I reviewed was the Eryone Maflex Build Plate. This time, I am reviewing a different type of build surface, the Ziflex by Zimple 3D. It’s a strong magnetic and flexible build surface for easy 3D print removal of all types of filament. Glue sticks, hair spray ... Read More »

I have finally got my hands on the Bigtreetech SKR V1.4 Turbo board! Due to supply and demand, there was a delay in getting the Turbo board when it first came out, but now it should be widely available. For this review, I won’t be installing the hardware side of ... Read More »

Resin 3d printers are some of my most valued tools in my workshop. Without them, there is no way that I could turn out the number of projects that I do on an ongoing basis.  But let’s be frank, there is the elephant in the room; and it’s large, stinky, ... Read More »

For those of you that own a resin 3D printer, you’ll notice that around the LCD screen there is a protective strip of tape which is a Resin Display Protection Vinyl. This can be bland and boring, but why not jazz it up with some colour!? Kevin from 3D DIY ... Read More »

Ok, so I’ve done a post on hotends where we looked at the Brozzl hotend so now let us look at Nozzles. Specifically from Dyze Designs with their new Tungsten Carbide Nozzle. My head is Spinning When it comes to choosing a printer nozzle, many users stick with what the ... Read More »

Bondtech, E3D, Titan and Micro-swiss etc There are so many different ways to handle the extrusion on your 3D Printer.  Without even touching the debate about whether direct drive or Bowden is better. And then if you want to print softer filament such as TPU or TPE, you can be ... Read More »

Brozzl before Nozzle…. Brozzl is not a name I had heard of before I went looking for an all metal hotend upgrade for my CR10s Pro. The requirement for an upgraded hotend came around due to the desire to print and test ASA, Nylon and ABS filament. This is something ... Read More »

3DLAC what’s that? Well let me tell you all about it….. Sticky Situation How often do you start a print off and have the confidence to walk away before that first later is down? Be honest, maybe 20% of the time? I level my bed obsessively. I use a feeler ... Read More »

Are you fed up of manually leveling your print bed? Why not invest in a GmFive 3D Touch v3.0 auto bed levelling probe! A BLTouch clone? Read on to learn more and with help on how to set this up. Packaging The GmFive 3D Touch v3.0 came in an oversized ... Read More »

Elegoo Smart Robot Minicar The Elegoo smart robot Minicar is a fun little kit car, aimed at younger age people but entertaining for all with the ability to make custom code. I’ll go into detail about different aspects of the car and its features in this review. Unboxing Opening the ... Read More »