Tutorials

  • January 19, 2019

    What is...

      This is the second part of the series for purchasing a new 3D printer.  If you missed the first part, go here.  This is the list of common printers with my impressions and opinions on the different printers out there. The Printers For the Wargame enthusiast, there are a...

  • January 18, 2019

    Write a...

    Introduction to Writing a Successful Article This article will show you, step by step, how to write a successful article.  I am going to break down all the major parts of getting your article to rank high on Google, to increase readability and also to have a high SEO score. ...

  • January 15, 2019

    HOW TO:...

      Remote Printing – Run your printers while away from home or the office Remote printing lets me run my 3D printers from anywhere.  I tend to keep my printers running, maybe not 24×7, but pretty close.  With multiple printers, it is rare to find my printer room with out...

  • November 13, 2018

    3D Printed...

    Hello all, I will explain how and why I created a beautiful 3D Printed fountain that contains only one cheap pump and nothing else!   Why do that ? Because why not, it’s extremely enjoyable to have your own 3D Printed fountain entirely printed in plastic.   What will you need...

  • September 19, 2018

    Installing NanoDLP...

    NanoDLP is a powerful, alternative, control software for DUP/DLP/SLA printers. Using a Raspberry Pi3 as the mainboard for the software. It’s incredibly useful for the Wanhao D7 because it enables you to control the printer remotely from a web interface. You can upload files to print using Wi-Fi or Ethernet connection, as...

  • August 12, 2018

    Octopi Install...

    Have you ever wanted to print or view your 3D printer remotely?  I am going to show you how to turn a Raspberry Pi into a lean, mean, video streaming, and 3D print serving machine… with Octopi! What is Octopi? Octopi is a free Linux based operating system built around...

  • August 6, 2018

    Tools of...

    Every trade needs its specialty tools, and a 3D maker is no different. In this article, I will supply you with all the necessary tools of the trade when it comes to 3D Printing! I will also provide Amazon links for you to buy them on the cheap. Adhesion We must start...

  • July 4, 2018

    Skycube Mods:...

    Who Wants Skycube Mods!? Well, if you didn’t get a chance to check out my review of the Aladdinbox Skycube.. do it now.  If you are too lazy to read that or you already have, the quick synopsis was that it sucked.  So you have a few options as an...

  • June 15, 2018

    Tutorial For...

    FEP Film Vat For UV- Resin 3D Printers Credit goes to Medelis 3D for this FEP film vat for UV-Resin 3D printers! You can check him out on Facebook and Youtube! When making a FEP film vat, it’s important that you use only PET laminating pouches as these are harder...

  • March 21, 2018

    Dehydrator to...

    Do What Now? This tale is about turning your average food dehydrator into a 3D filament dryer.  Storing hygroscopic filament correctly is very important.  Hygroscopic means that the filament can absorb moisture from the air.  I store all of my filament, even my PLA, in lockable totes with foam seals...

Page 1 of 2
  • 1
  • 2