Misc Tutorials

  • January 18, 2019

    Write a...

    Introduction to Writing a Successful Article This article will show you, step by step, how to write a successful article.  I am going to break down all the major parts of getting your article to rank high on Google, to increase readability and also to have a high SEO score. ...

  • January 15, 2019

    HOW TO:...

      Remote Printing – Run your printers while away from home or the office Remote printing lets me run my 3D printers from anywhere.  I tend to keep my printers running, maybe not 24×7, but pretty close.  With multiple printers, it is rare to find my printer room with out...

  • August 6, 2018

    Tools of...

    Every trade needs its specialty tools, and a 3D maker is no different. In this article, I will supply you with all the necessary tools of the trade when it comes to 3D Printing! I will also provide Amazon links for you to buy them on the cheap. Adhesion We must start...

  • July 4, 2018

    Skycube Mods:...

    Who Wants Skycube Mods!? Well, if you didn’t get a chance to check out my review of the Aladdinbox Skycube.. do it now.  If you are too lazy to read that or you already have, the quick synopsis was that it sucked.  So you have a few options as an...

  • March 21, 2018

    Dehydrator to...

    Do What Now? This tale is about turning your average food dehydrator into a 3D filament dryer.  Storing hygroscopic filament correctly is very important.  Hygroscopic means that the filament can absorb moisture from the air.  I store all of my filament, even my PLA, in lockable totes with foam seals...

  • March 17, 2018

    Thermoform Your...

    Introduction to Thermoform Hey guys and gals, today I am going to go over how to thermoform your 3D printed parts.  This is useful for the 3D printed hands and arms that I do for E-Nable.  I will go over some of the benefits to this process, and some ways...

  • February 24, 2018

    3D Printer...

      PLA  PLA 3D printer filament has a lower printing temperature than ABS, and it doesn’t warp as easily, meaning it doesn’t require a heating bed (although it definitely helps). Another benefit to using PLA is that it doesn’t give off an evil smell during printing. This filament is considered...