Table of Contents
*****UPDATE- THIS PROJECT WONT BE GOING AHEAD ANYMORE!!*****
This beautiful Titan Aero designed by the guys at E3D-Online has got to be the best bit of kit I have seen around, not only does it perform like a dream but looks sexy too.
This is not a plug and play kit, there is some wiring involved and and please take pictures of your configuration on the wiring before pulling out all those cables . You will also need to either purchase the bracket from e3d-online. As you can imagine there is no way the guys could make a housing as to many possibility’s.
If you want a brilliant housing with plenty of options then check out a member called hang tight his mount and all the brackets for able and more is here Thingiverse mount. So give the guy a big thumbs up and a tip too, I am sure he will be happy with that as he puts in a lot of work into it and keeps it updated too.
So I won’t go into to much detail as the video will hopefully explain it all for you….BUT
- Please make sure you are fully confident in doing this project.
- Insure you have the correct version 12v or 24v, please check prior to ordering.
- If in doubt ASK. We don’t want you to be unhappy or worse break your printer.
- Take your time and take pictures of things your not sure of so you can back track.
Also while you are here please check out Inov3D author 8irdyboyuk (Michael Bird) article on the OpenRC F1 Car Project
Unboxing
Assembly
Michael Grant
Seriously, I have just spent five minutes of my life reading this, and the standard of written English is appalling. Do you give your reviewers any kind of grammar/writing tests before they are allowed to post on the site?
Along with the WordArt from the 1990’s on the video, this kind of content is a bit out of place on what is otherwise a great website for information.
lynne
thank you for your comment this was just a quick article to go along with the video, yes all posts get looked over by an editor but there must of been parts missed.
the word art yes we have talked to the author this will be removed in future, we are trying new things out somethings work somethings don’t. thank you for your kind words about the website we try our best, for all videos there will be short articles just a quick description of the video.
Roberto Lo Giacco
May I ask why the project has been halted? I intend to upgrade my Ender 3 to a Titan Aero and I wish to know if you found any blocking difficulty…
lynne
The author is now not with us