Table of Contents
Enotepad is popular for their 3D Printers, Fila Dryer S1, 3D Pens, LCD Writing Tablet and of course 3D Printer Filament. Enotepad Carbon Fiber Filament and Marble Filament comes in a cardboard box with recommended printing parameters and a brief summary. The plastic bag has been vacuum sealed, but it is not reusable. There is also a bag of desiccant inside to keep the filament dry during transport. The overall design for the packaging and filament spool is nice.
Where To Buy
You can buy directly from the Enotepad website currently the manufacturer has a great deal on with an additional 10 percent off if you use the code Enotepad10%off
2KG Marble PLA £22.21
2KG Carbon Fiber PLA £29.06
About Enotepad
Founded in March 2018, Zhuhai Enotepad Technology Co., Ltd. is a subsidiary of Zhuhai Sunlu Industrial Co., Ltd. It is a high-tech enterprise specialized in intelligent liquid crystal display technology integrating R&D, manufacturing, sales and service. The core team has many years of experience in LCD technology and research and development. It focuses on product development in the field of liquid crystal display.
Such as digital drawing and handwriting input. It insists on continuous innovation in technology and continuous research and development on products. Enotepad is founded on the dream, love and ultimate, focus and long-term pursuit, will bring the unparalleled dream of the LCD series products.
| Facebook Page | Facebook Group |
Enotepad PLA Carbon Fiber Filament Specifications
| Model：PLA Carbon Fiber | Diameter Format 1.75mm | N.W: 1kg |
| Print Temp.：190-230℃ | Print Speed：50-100mm/s | Certificate: RoHS, Reach |
| Tolerance：±0.02mm | Platform Temp：Depends on the platform: No need or 60-80℃ | Packing Size: 209*209*73mm |
| Length：300m | Tensile Strength：11-14kgf | Melt Flow Rate：11-16/10 min(220℃,10kg) |
Enotepad PLA Marble Filament Specifications
| Diameter：1.75MM | Platform Temp: Glue required if not heated. Glue unrequired if heated 60-80 ℃ | Length: 1.75mm(1KG)=330M |
| Tolerance：±0.02MM | Bubble：no bubble Tension（kgf）: 11-16 | G.W: 1.3KG.roll, |
| Print Temp：200-230℃ | Melt Mass Flow Rate：7-9g/10min(190 ℃,2.16Kg) | N.W.: 1 KG.roll, |
| Print speed：50-100mm.s | Breaking elongation：4% |
3D Printer Settings
I’m using the IDEX dual independent extruder 3D Printer from JGmaker their Artist D Pro and using a 0.6 nozzle for these filaments. The basic setting I used was Infill 15%, perimeter shells 2, top solid layers 4, bottom solid layers 4, heat bed temperature at 55c, hotend temperature 220c and used a layer height of 0.24. With a 0.6 removable Artist D nozzle, I made several prints using this PLA filament. Let’s go check it out!
3D Printed Models
This Marble Filament is everything Enotepad promised. The finish is glorious; you can almost convince yourself that you are holding a stone. The appearance is phenomenal! I had no issues using the Marble filament, no major stringing, nothing that can not be burnt off. Enotepad Marble PLA is a nice-looking filament with a realistic marble effect. This would be ideal for bridges and buildings.
In all fairness, I’m not a big fan of Carbon Fiber it’s maybe not super simple to print with this. I think we can all agree Enotepad Carbon Fibre PLA needs some more calibration than the Marble did far too much stringing. You do really need to take time to improve your 3D printer settings for it to work great. A great tip if u are ever using filaments and your support fails, try reducing the speed that you print the support. Carbon Fibre has an extraordinary strength to weight ratio, so they frequently add it to PLA or PETG for strength.
Tooth Brush Standz – By muzz64
PLA Filament Conclusion
Overall, it’s been a wonderful experience, and most of the 3D prints turned out surprisingly eye pleasing. It takes some time tuning the PLA filaments but once you get it right; it prints remarkably well. You can acquire the Marble filament and Carbon Fiber filament directly from Enotepad website.
Related Filament Articles:
- Biqu Matte 3D Printer Filament Review – by Lynne
- Geeetech Marble Filament Review – by carl
- Carbon Fiber PETG Filament Review – by Mark
Overall, it's been a wonderful experience, and most of the 3D prints turned out surprisingly eye pleasing. It takes some time tuning the PLA filaments but once you get it right; it prints remarkably well. You can acquire the Marble filament and Carbon Fiber filament directly from Enotepad website.
