Eryone TMC 2209 is a wonderful addition to the market of stepper motors from Eryone3d. The stepper motors are an integral part of the 3D printers. It is the main part that makes precision printing possible. The basic function of the stepper motor is to move the printing head/nozzle in calculated steps as per the instructions giving by the user. So let’s discuss a little about the Eryone TMC 2209 stepper driver as it is one of the best stepper motor drivers available in the market.
Main Features of Eryone TMC 2209
The Eryone TMC 2209 provides a high level of control to its user. Because of the miclroPlyer interpolation unit, it provides up to 256 sub-parts of motion. Thus, giving a smoother control over the sinusoidal waveform of the AC mains. This not only ensures higher efficiency of the machine but also provides more control to the user to choose from more number of steps.
In addition to the increased level of control, the TMC 2209 stepper motor driver also provides a greater speed of operation. Furthermore, the acceleration and deceleration of the motor is fast. This ensures that you are able to finish your print jobs much faster.
Integrability and Flexibility
One of the major advantages of using the Eryone TMC 2209 is its integration possibility with existing printers. The TMC stepper motor driver is compatible with most of the present time 3D printer electronics. Plus, the interface is simple and can be integrated with little hassle. You can connect the driver by using the standard step connector or the dir interface connector. These connectors are easily available and also easy to connect.
TMC 2209 stepper driver has a special CoolStep current dynamic change technology. This technology allows better management of the power source. Thus, it ensures that the energy is not wasted as heat or sound and it converts most of the electrical energy into kinetic energy. This also ensures that the machine works efficiently and does not produce high levels of heat or sound. The feature can save around 70% of the energy.
The StealthChop mode provides a very quiet mode of operation for the stepper motor driver.
No more messy setting the current via the potentiometer you can set it via software Marlin Firmware
TechSpecs of the Eryone TMC 2209
|Pin configuration type||CFG pins or UART|
|Logic Voltage||3-5 volts|
|Motor Voltage||4.75-36 volts|
|Continuous Drive Current||1.4A|
Summing up, we would like to say that the Eryone TMC 2209 is an amazing stepper motor that is available in the market. However, this is a product purely for the 3D printing geeks. Because this requires a substantial amount of tweaking and adjustments before you can fix the stepper motor driver with your 3D printer. Managing the heating of the driver is something to be taken care of by the user.
In this regard, the manufacturers have pointed out that it requires extra cooling facilities with the driver. In addition, the motor should not be connected when measuring the voltage, as it can burn the driver. Finally, you must see the directions of the motor while installing it. Hence if you think you can take all these precautions then we at Inov3D say it is safe for you to use this accessory with your 3D printer. However, if you are a beginner in 3D printing, then this driver is not for you, you can however get great support on eryone facebook group.
Where To Buy
The Eryone TMC 2209 stepper driver is available for £32.99 at Amazon UK for 5 stepper drivers, and $33.99 on Amazon USA for 5 stepper drivers. However, this price can change in addition, you can purchase direct from Eryone at a price of £31.68.