The TEVO Tornado also known as the Homers Aeolus is a 3D printer with an enormous build volume. It has a price tag that interests a lot of 3D printing enthusiasts. Well, a lot of enthusiasts mark the TEVO Tornado to be very similar to Creality CR-10. However, there are certain aspects of the printer that make it distinct from other printers of the same category. So let’s check out how this printer stands against the others in the market.
Key Features of the Homers Aeolus
Enormous Build Volume
One of the most amazing features of the Homers Aeolus is its build volume. For the budget price tag, the printer offers a build volume of 300 mm x 300 mm x 400 mm. This is an amazing build volume considering the price tag of the printer. Subsequently, the Tornado ranks much higher in this domain against most of the printers in the market.
Layer Resolution and Print Speed
Layer resolution and print speed go hand in hand in every 3D printer. The Tevo Tornado offers a minimum layer thickness of 50 microns. In addition, it can reach this layer resolution at a speed of 150 mm/s.
A lot of 3D printing enthusiasts compare the Tornado with the Creality CR-10, however, there are a few very eminent differences between the two desktop-based printers that can be observed. First it is the extruder that is different. The TEVO Tornado houses the Titan Extruder. Usually, this extruder is offered as an upgrade to the basic models. However, Homers is offering the extruder as a base kit item which is quite a takeaway. As a result, you can easily use TPU and other such flexible filaments because of the Titan Extruder.
AC Heat Bed
Another major inclusion in the Homers AEOLUS is the AC Heat bed. This allows you to use the AC mains directly to heat the bed. Thus, allowing for heating of the bed in less than a minute.
DIY Kit and Assembly Homers AEOLUS
Unboxing and assembling the 3D printer is one of the most critical stages of starting the use of a 3D printer. And the Homers Aeolus proves to be a total gem. You do not have to make any extra effort into arranging the difficult to handle wirings or read the instruction manuals for setting up. All you have to do is move swiftly through the easy and self-explanatory setup of the printer. And that is another reason the printer is so popular among printing enthusiasts.
Where to Buy
You can purchase from their official website for a good price of $358 or from banggood
Final Word: Homers Aeolus
Summing up, we can say that the Homers Aeolus is an amazing printer at the price tag. You can easily customize a lot of parts of the printers and get the output of your desire. Getting an enormous build volume, AC mains heated bed, and on top of it all a Titan extruder is something is more of a bonus at this price tag.
More 3D printer Articles: