Archive for Review

  • August 23, 2018

    Tevo Michelangelo...

    The tevo michelangelo is a great 3D Printer for someone that is just starting to get into 3D Printing does not cost alot  

  • August 23, 2018

    Biqu Magician...

    this was a great printer quality was amazing did not have any issues with it at all great starter printer, all you need to do is unpack assemble spool holder level bed and print        

  • July 30, 2018

    Micro Swiss...

    Hey Guys and Gals!  Today I’m going to go over some of the finer points in using an all metal hot end,  why you should ditch the knock off J-heads, and rock a Micro Swiss All-Metal hot end.  In keeping with the transparency that I feel is important, I was...

  • June 8, 2018

    BIQU Magician...

    BIQU Magician Lipstick-Sized Delta Rostock 3D Printer   Well, let me start off saying first impressions of this BIQU Magician printer seem great! Good quality packing it comes in. A great big cylindrical tube! You could use this as a stool, or even a place to put your printer on…this...

  • June 4, 2018

    Hobby King...

    This review is for Hobby King Transparent Red PLA filament, in 1.75mm.  I will be going over it’s print quality, ease of printing, and performance in price. Test Bed for the Review The test bed for this review of the Hobby King Transparent Red PLA is my ever faithful Tevo...

  • June 4, 2018

    Aladdinbox Skycube...

    Introduction Where do I begin?  I am still looking for the perfect 3D printer for a ‘New-To-The Hobby’ kind of person, although the Geeetech E180 was very close. Something that comes fully built, easy to use, easy to maintain, and finally with open avenues of support. The Aladdinbox Skycube doesn’t...

  • June 2, 2018

    Sunlu Filament...

    Sunlu filament – It’s rubbery, it’s plastic, it’s fantastic!   Sunlu Filament seems pretty good already. As you will see i added strawberry laces as the background image, now i bet you are thinking why?. Well when i opened the box and took it out, it looks and feels exactly...

  • May 18, 2018

    Geeetech E180...

    Introduction Hello all, today I am going to be giving you the run down on the Geeetech E180.  I’ve had this printer for two weeks and I was able to print a significant amount of things on it.  This is the initial review, where I will break down what it...

  • April 28, 2018

    Tronxy X3S...

    Inov3D would like to thank Gearbest for sending us their Tronxy X3S for review. We always try our best to give a fair review with the Good and the Bad Points. With any review, we will contact the company if we find any problems to try and get those issues...

  • March 28, 2018

    Tesla Aluminum...

    Aluminum Filament Today we’re going to share our review of Tesla aluminum filament for 3D printers with you. This 3D filament falls into the “exotic filaments” category, which includes filaments that are more than just basic PLA, ABS or other filaments partially made of wood or metal. So, you have...

Page 2 of 3