Atomic Filament is my go to 3D Printing filament for all my PLA and PETG needs. Not only do they have a wide pallet of colors to choose from. Such as ABS, Silky Effect PLA, 3.5KG Jumbo Rolls and Exotic 3D printing filaments are available. I first came across Atomic ... Read More »

  Everyone has a favorite 3D printer slicer software, ranging from Cura, Pronteface, Slicer, and there are a lot of the free ones that are pretty decent as well. Despite this, Simplify3D is something else to me, with its premium price of $149 Simplify3D is so confident in their software ... Read More »

Selecting the right 3D design software is extremely important for you to attain the best 3D modeling results. While there is multiple 3D design software available in the market, we will be listing a few of the best ones below for you to choose from. The Best 3D Design Software ... Read More »

x This will be a continuous article that will get updated each time a new rainbow filament comes in. The Rainbow Filaments are suitable for all FDM 3D printers that can handle 1.75mm diameter.  I am just going to explain the settings, models, 3D printers that were used. Also will ... Read More »

Left is bad extrusion width and right is good extrusion width What is printer resolution? Extrusion Width and Layer Height = Resolution. If you want higher resolution,  then you would use smaller values. If you want lower resolution,  then you would use higher values.  These settings will not fix extrusion problems.  ... Read More »

This issue may be a quite common one for brand spanking new 3D Printer owners, however things can be straight forward to resolve. In this article it will cover four common cause that can happen to the extruder, we are going to practice each below and justify what settings are often accustomed solve the matter. Prime The Extruder At The Beginning Most extruders have a foul habit ... Read More »

It is really important to make sure your 3D Printer Build platform or “bed” is at a level distance on all points of the bed with the extruder nozzle. There are two ways of doing this, manual and automatic bed levelling.  Manual Bed Leveling Manual is moving the extruder head to ... Read More »