Colorfabb Copperfill isn’t new, it was released in 2014 and has been one of the more successful speciality filaments. Over the years, people have shifted more and more to post-processing their 3D printed parts to spice up the prints. This is exactly where this material shines (literally), but it will ... Read More »
x This will be a continuous article that will get updated each time a new rainbow filament comes in. The Rainbow Filaments are suitable for all FDM 3D printers that can handle 1.75mm diameter. I am just going to explain the settings, models, 3D printers that were used. Also will ... Read More »
3D printing with Nylon seems to be one of those things that the 3D printing community doesn’t talk about much. Admittedly there was a learning curve to getting a successful print. However, once I got it dialed it, I believe it prints just as good as PLA with the advantage ... Read More »
Polycarbonate is the strongest 3D printer filament presented in this list, it is extremely durable and resistant to both physical impact and heat. PC is able to withstand temperatures of up to 110°C. With it also being transparent, this explains why it is used in commercial items such as, bullet proof glass, scuba ... Read More »
TPE ( thermoplastic elastomers) is plastics with rubber-like qualities, making them extremely flexible and durable. TPE is commonly found in automotive parts, household appliances. Soft and stretchable, these filaments can withstand punishment that neither ABS or PLA can to handle. On the other hand, TPE can be difficult to extrude not the easiest filament to use. ... Read More »
Nylon a popular family of synthetic polymers, that are used in many industrial applications. Compared to most other 3D printer filament types. This filament ranks as the number one contender when together considering strength, flexibility, and durability. Another unique characteristic of this filament is that you can dye it, either before or after the printing ... Read More »
PETG is best known as the polymer used in water bottles, it is also found in clothing fibres and food containers. ‘G’ in PETG stands for “glycol-modified”, this makes the filament clearer, less brittle, and most importantly it is easier to use. This is often considered a good middle ground between ... Read More »
ABS filament (acrylonitrile butadiene styrene) is actually moderately superior to PLA, despite being slightly more difficult to print with. Products made of ABS boast high durability and a capacity to withstand high temperatures. Keep in mind the filament’s high printing temperature has a tendency to warp during cooling, and intense fumes. If you are using this ... Read More »
3D Printer Strength: High | Flexibility: Low | Durability: Medium Difficulty to use: Low Print temperature: 180°C – 230°C Print bed temperature: 20°C – 60°C (but not needed) Filament Properties: Shrinkage/warping: Minimal Soluble: No Food safety: Refer to manufacturer guidelines PLA 3D printer filament has a lower printing temperature than ABS, and it doesn’t warp as ... Read More »
Do What Now? This tale is about turning your average food dehydrator into a 3D filament dryer. Storing hygroscopic filament correctly is very important. Hygroscopic means that the filament can absorb moisture from the air puppet I store all of my filament, even my PLA, in lockable totes with foam ... Read More »
